Page 1 of 4 1 2 3 ... LastLast
Results 1 to 10 of 33

Thread: Trilogy Supercharger Kit

  1. #1
    Senior Member musclemerc's Avatar
    Join Date
    Apr 2014
    Posts
    523
    Likes
    164
    Liked 212 Times in 117 Posts

    Trilogy Supercharger Kit

    Looking to sell my Trilogy setup. It's a complete kit and has very low miles.

    Most of you know I built this kit and replicated the small parts down to the smallest details. The supercharger was purchased from Hotford after he custom built a twin screw Trilogy kit.

    The supercharger has spent it's entire life with a 3.0 pully and a stock lower making an easy 13.5psi. The kit is currently bolted down and running so I would require time to remove the major components. Total miles on the kit is about 7000 and everything is in VERY good condition. The rotors still have the Teflon coating and are clean and free of any oil residue it also has the revised adapter plate with the IAT sensor. This kit is cosmetically and mechanically 100%

    The kit comes with the following parts:
    7000 mi Trilogy SC
    Lower intake with intercooler pass throughs
    Cobra Lower Intercooler
    Rousch 3 bolt tensioner with 90mm double bearing idler
    Jerry's SC brackets polished
    Alt. Pully *new in box*
    Froozenboost type 100 heat exchanger *new in box*
    Bosch intercooler pump with pigtail and bracket *new in box*
    Cobra intercooler reservoir
    Intercooler reservoir bracket
    Cobra 39lb injectors
    Lightning MAF
    Mafia MAF extender
    4 inch cold air kit
    Spare Trilogy lower pully
    2 Gates SC belts 1-used 1-new
    Jerry's SS COT kit **Verified by the man himself. COT is in stock**

    I hope I'm not forgetting anything in the parts list. I will update the list if I did.

    I would also be willing to install this kit if the buyer is willing to drop his MM off at my home shop.

    Price for the complete kit is $5500.00 plus PP fees and shipping.

    I can add an SCT 3000 with Mo's SC tune for a 03 MM for an additional $300.00 Tuner is in new condition

    The new parts included will be ordered and shipped directly to the buyers doorstep. I plan on keeping the used items on the car for my next build.

    Travis 6016653349

    IMG_0964.jpg
    IMG_0962.jpg
    IMG_0961.jpg
    IMG_0964.jpg
    Attached Images Attached Images
    Last edited by musclemerc; 08-11-2017 at 10:54 PM.

  2. #2
    Senior Member RubberCityRauder's Avatar
    Join Date
    Apr 2014
    Location
    Akron, OH
    Posts
    1,603
    Likes
    715
    Liked 1,418 Times in 746 Posts
    that will be a nice kit...what are your future plans? bigger blower? , turbos? coyote swap?
    2004 SB w/Trilogy 48[/SIZE]
    With new mods and stuff

    "There's no way she is going to fit that whole thing in her....Oh my god, she did"

  3. #3
    Senior Member musclemerc's Avatar
    Join Date
    Apr 2014
    Posts
    523
    Likes
    164
    Liked 212 Times in 117 Posts
    Iron cobra block, 9 thread heads, and something different like a TVS or KB

  4. The Following User Likes This Post:

    whitey (08-07-2017)

  5. #4
    Junior Member
    Join Date
    Oct 2014
    Posts
    12
    Likes
    10
    Liked 5 Times in 3 Posts
    Hmmmm🤔

    Sent from my XT1635-02 using Tapatalk

  6. #5
    Senior Member
    Join Date
    Aug 2014
    Posts
    138
    Likes
    16
    Liked 51 Times in 31 Posts
    Say it ain't so !!!!!

    Too cheap hint hint.

    Nice to see your going bigger Travis. Bigger means upgrading the parts all the way to the rear tires too : )

  7. #6
    Senior Member RubberCityRauder's Avatar
    Join Date
    Apr 2014
    Location
    Akron, OH
    Posts
    1,603
    Likes
    715
    Liked 1,418 Times in 746 Posts
    Quote Originally Posted by musclemerc View Post
    Iron cobra block, 9 thread heads, and something different like a TVS or KB
    Nice!!! I'll look forward to seeing this come together. I wanted to go whipple, tvs, something, but since i dont wrench to this level, nor have space, nor tools for this. it costs me for teardown /install so i just had my Trilogy ported, it is on it's way back to Mo's speed shop today...it just got too expensive to start all over...i do have forged pistons and rods so tweaking the trilogy will be fine.

    i want to have something else one day...wagon or something with 600 plus ponies rwhp...so dont think ill take mine any further
    2004 SB w/Trilogy 48[/SIZE]
    With new mods and stuff

    "There's no way she is going to fit that whole thing in her....Oh my god, she did"

  8. #7
    Senior Member musclemerc's Avatar
    Join Date
    Apr 2014
    Posts
    523
    Likes
    164
    Liked 212 Times in 117 Posts
    Quote Originally Posted by MMBLUE View Post
    Say it ain't so !!!!!

    Too cheap hint hint.

    Nice to see your going bigger Travis. Bigger means upgrading the parts all the way to the rear tires too : )
    Already did David.

    Fully built E series transmission
    3000 PI stall
    31 spline axles
    Cobra CF carrier
    4:10's

    Need me some wide wheels though
    Last edited by musclemerc; 07-29-2017 at 09:40 AM.

  9. The Following User Likes This Post:

    MMBLUE (07-30-2017)

  10. #8
    Senior Member musclemerc's Avatar
    Join Date
    Apr 2014
    Posts
    523
    Likes
    164
    Liked 212 Times in 117 Posts
    Quote Originally Posted by SOSA03 View Post
    Hmmmm��

    Sent from my XT1635-02 using Tapatalk
    Buy it.... You won't find a more complete drop in kit anywhere.

  11. The Following 2 Users Like This Post:

    Guspech750 (08-06-2017), whitey (08-07-2017)

  12. #9
    Senior Member
    Join Date
    Aug 2014
    Posts
    138
    Likes
    16
    Liked 51 Times in 31 Posts
    Quote Originally Posted by musclemerc View Post
    Buy it.... You won't find a more complete drop in kit anywhere.
    SOOOOOOOOOOO true. This is selling on the cheap. I can't believe its still for sale.

  13. #10
    Senior Member musclemerc's Avatar
    Join Date
    Apr 2014
    Posts
    523
    Likes
    164
    Liked 212 Times in 117 Posts
    Quote Originally Posted by MMBLUE View Post
    SOOOOOOOOOOO true. This is selling on the cheap. I can't believe its still for sale.
    Neither can I.

    This kit has quite a few upgrades over a 100% stock Trilogy kit.
    3.0 SC pully 13.5psi
    Bigger heat exchanger
    Roush tensioner with a Metco 90mm pully -0- belt slip
    Jerry's SS COT
    90mm MAF
    Mafia MAF extender

    Condition of all parts are mint...
    Last edited by musclemerc; 08-07-2017 at 02:59 PM.

  14. The Following User Likes This Post:

    Guspech750 (08-08-2017)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •